 |
|
 |
 |
| ADD: E7-25# Industry |
| District,Jingqiao |
| Industry Park, |
| Muxudong Road, |
| Suzhou, China |
| Post code: 215101 |
| Tel: 0512-67688912 |
| Fax: 0512-67688902 |
| Email: sales@szkolon.com |
| Website: www.szkolon.com |
|
|
|
|
| GORE Joint Sealant |
|
Wide range of applications |
| Gore joint sealant can be -268 ℃ to +315 ℃ temperature range of safe use, and can withstand the vacuum to 200Bar from internal pressure, the PXT factor of 1,800,000. In addition, most of this material has the anti-corrosive chemicals. It can, under normal use in low temperature, consistent with FDA / USDA standards for food pharmaceutical industry an ideal seal material, as long as the operating parameters on any occasion does not exceed the scope of its use, you can long-term use. |
| No need to re-tighten the bolts due to creep |
| Gore joint sealant installed correctly, pressing force to meet the requirement, it can withstand high pressure loads. Its resistance to creep and cold flow properties, it has been able to maintain reliable sealing performance. In many occasions, even at 315 ℃ environment to work, only once to install pressure, will never leak. |
| Very easy to install and replace |
| Simply unfold the gum, the GORE-TEX Interface sealing material paste on the flange bolt circle distribution within the surface to complete the installation. As the sticky, slightly grease or water stains in the surface mount is not a problem. Gasket bolt hole in a position overlapping, according to the bolt and tightened. Routine maintenance, the flange to facilitate removal, Gore joint sealant is easy to remove, will not stick in the flange surface, thus greatly saving maintenance time. |
| Save money and time |
| Gasket alone in terms of, Gore joint sealant as to avoid wastage of materials, so spending less than other materials. Besides, given the shape cutting, etc. without prior preparation, installation, just put it in the corresponding surface, thus saving installation time down. At the same time you will find varieties can reduce the inventory of materials, storage of only three or four different widths of the sealing material can be Al Gore interface to the factory to meet the needs of the whole. |
| Applied to seal the fragile interface connection |
| As the Gore joint sealant, only very small when the pressure, and are suitable, such as glass, plastics, ceramics and other fragile material, graphite sealing connection. |
| Gore joint sealant to meet virtually all enclosed places of industrial needs |
|
| Good strength and flexibility |
| characteristics have to be |
| complicated or damage to |
| the surface of the inside to |
| seal materials. |
| |
|
| Figure widely used, |
| because the majority of |
| chemical substances with |
| anti-corrosion, which is |
| applied to the equipment |
| requiring high chemical |
| seal. |
|
|
| Flange of the flange in |
| sealing large equipment, |
| Gore joint sealant without |
| prior cutting. |
| |
| |
|
| Creep resistance and |
| resistance to cold flow |
| performance, to maintain |
| good sealing state can |
| avoid the installation bolts |
| swirling again. |
| |
|
|
| Gore joint sealant produced |
| without waste thus saving |
| time and expenses. |
| |
| |
| |
|
| With sticky gum to the |
| vertical surface is also very |
| easy to install. |
| |
| |
| |
| |
|
|
|
|
|
 |
